Working on another Techs territory while he is out on leave.
BH 363- has 900k on it.
Customer called for jamming---I arrived and saw both PFs for tray 1 & 2 are hammered (200k+)
Replaced tires and cleaned up both, tray 2 feeds fine (sometimes sounds like it struggles) while tray 1 Makes a LOUD Grinding kind of Rubbing friction noise and jams either under Regroller, or before paper exit entrance above fuser (jams in fuser)
EDIT: Tray 2 will intermittently jam, and dog ear copies..There is a mod to install guides on the PF and also the frame, but that doesnt solve why tray 1 is jamming. Ordered Transport Motor, Timing bearings, and worst case: The whold damn right side door assy. GRRRR. Any help would be great :)
Jam codes :Predominately 3001-1101-
Never seen this before,
Any Suggestions would be a big help, thanks all
-Z
BH 363- has 900k on it.
Customer called for jamming---I arrived and saw both PFs for tray 1 & 2 are hammered (200k+)
Replaced tires and cleaned up both, tray 2 feeds fine (sometimes sounds like it struggles) while tray 1 Makes a LOUD Grinding kind of Rubbing friction noise and jams either under Regroller, or before paper exit entrance above fuser (jams in fuser)
EDIT: Tray 2 will intermittently jam, and dog ear copies..There is a mod to install guides on the PF and also the frame, but that doesnt solve why tray 1 is jamming. Ordered Transport Motor, Timing bearings, and worst case: The whold damn right side door assy. GRRRR. Any help would be great :)
Jam codes :Predominately 3001-1101-
Never seen this before,
Any Suggestions would be a big help, thanks all
-Z