Was desperate for one machine to get it to work on Friday so sharing some info :) Used bulletin info, but did not have the parts. So used spares from previous call outs and a bit of DIY, and it works.:cool:
Parts needed :
1x Translucent Mylar strip with 2-sided tape (Kyocera Mita 5050 registation Guide)
1x Black Mylar that has 2-sided tape (The one used for covering Toner Ducting Filter Box on TaskAlfa 5500i)
1x Kyocera 5050 Reg.Roller Dust Remover with 2 sided tape (2" cut then sliced in half lenghtways)
photo 1_1.JPGphoto 2_1.JPGphoto 4.JPGphoto 3.JPGphoto 5.JPG
Have Fun!
Parts needed :
1x Translucent Mylar strip with 2-sided tape (Kyocera Mita 5050 registation Guide)
1x Black Mylar that has 2-sided tape (The one used for covering Toner Ducting Filter Box on TaskAlfa 5500i)
1x Kyocera 5050 Reg.Roller Dust Remover with 2 sided tape (2" cut then sliced in half lenghtways)
photo 1_1.JPGphoto 2_1.JPGphoto 4.JPGphoto 3.JPGphoto 5.JPG
Have Fun!