Have a strange one going on with one of these, machine is indicating front cover open, which points to the airplane hanger type door.
When i go into S.P. inputs and check it says left door switch no change, check with a meter and you get 37 volts anywhere along circuit until you actuate the switch then it drops to 0 and never goes back up till you reboot, yet front door open is diplayed constantly.
I am ordering the MCU board and hoping thats the cure.
Anyone had this ?
When i go into S.P. inputs and check it says left door switch no change, check with a meter and you get 37 volts anywhere along circuit until you actuate the switch then it drops to 0 and never goes back up till you reboot, yet front door open is diplayed constantly.
I am ordering the MCU board and hoping thats the cure.
Anyone had this ?