Hi Guys
Got the fuser making knocking noise, as if cannot find the home position.
I have replaced fuser fixing film unit complete wiring loom all sensors on fuser.
cams are fine.
also tested on another copier doing the same fault
works sometimes for few minutes than knocking noise starts keeps rotating.
lost for ideas now.
if any one had similar issues any help would be much appreciated.
Many thanks in advance
Got the fuser making knocking noise, as if cannot find the home position.
I have replaced fuser fixing film unit complete wiring loom all sensors on fuser.
cams are fine.
also tested on another copier doing the same fault
works sometimes for few minutes than knocking noise starts keeps rotating.
lost for ideas now.
if any one had similar issues any help would be much appreciated.
Many thanks in advance