I have a C1 with decurler, punch and AA2 Finisher. When I run 11x17 either through drawer or bypass, the sheets are coming out wrinkled on the lead edge as it comes out of the finisher. The length of the wrinkles are about 6 inches long. Running a 60# offset paper. It appears that the wrinkles are not happening at the fuser, as there is no evidence of toner not fusing to the paper. The paper is from a fresh ream.
I have tried several different paper setting with various curl adjustments. Nothing seems to help.
Is there a way to "turn off" the decurler action? I'm thinking there might be too much pressure between some rollers, but not exactly sure. It seems when I run label stock, I don't hear it cycle through the decurler like card stock, but the ImagePress will not let you pick label stock with 11x17 size.
Any suggestions?
I have tried several different paper setting with various curl adjustments. Nothing seems to help.
Is there a way to "turn off" the decurler action? I'm thinking there might be too much pressure between some rollers, but not exactly sure. It seems when I run label stock, I don't hear it cycle through the decurler like card stock, but the ImagePress will not let you pick label stock with 11x17 size.
Any suggestions?