Quick question, I have a customer that after they print anything, a word doc or email etc the machine prints out this page. I looked in the driver cant see any option to turn this off!?
↧
MPC3003 turn off print log page
↧
MP5001 cuting copy to A5
One MP 4000 when using combine option prints out a copy with both faces of small original nicely placed on A4 one is up and one is down,but there is one MP 5001 that cuts the copy,or should I say scans original only as far as A5 sensors go on scanner.
it's not a problem if user place small item on glass such as copy of ID card's both faces but if it's a bit larger scanner don't go past A5 sensors in scanner.
Now flipping originals on glass other way around is out of the question...user said :"Fix them so they work same way I don't care"
From what i noticed scanner scans full lenght up to A4 marker on ruler only if DF cower is up and I place paper over the A5 sensors,I cleaned optics and vacumed those sensors,checked DF cower sensors and it all seems to be fine.
Using full size or auto reduce enlarge options doesn't make any difference,could it be some setting or meybe machine needs firmware update,I can't determine if it's the DF cower that's confusing the sensors or is it the original size sensors that's faulty...machine asks for A5 paper even if A4 size paper is placed on glass...some confusing dumb ass trick that I'we newer had to face with before,meybe some smudges on the cower right around the place that goes over the A5 sensor?
it's not a problem if user place small item on glass such as copy of ID card's both faces but if it's a bit larger scanner don't go past A5 sensors in scanner.
Now flipping originals on glass other way around is out of the question...user said :"Fix them so they work same way I don't care"
From what i noticed scanner scans full lenght up to A4 marker on ruler only if DF cower is up and I place paper over the A5 sensors,I cleaned optics and vacumed those sensors,checked DF cower sensors and it all seems to be fine.
Using full size or auto reduce enlarge options doesn't make any difference,could it be some setting or meybe machine needs firmware update,I can't determine if it's the DF cower that's confusing the sensors or is it the original size sensors that's faulty...machine asks for A5 paper even if A4 size paper is placed on glass...some confusing dumb ass trick that I'we newer had to face with before,meybe some smudges on the cower right around the place that goes over the A5 sensor?
↧
↧
Printing problem with MP C3003 PCL6 driver
I was at a customer yesterday with a new MP C3003. They had been printing fine from all the software they used last week. The customer is a mortuary and the program that they used to create and print items related to the funeral, guest book, etc, started giving them a error message having to do with being unable to convert for printing. I printed the error message and have it on my clipboard that I left at the last customer I went to who is a hour drive away. I will have it this afternoon. Their software support people installed the XPS driver which does allows them to print but does not allow custom paper sizes, funeral announcement cards and envelops are printer through the bypass on custom sizes. The PCL 6 drivers for their previous MFP, MP C6501 and MP C2550, will print. I am thinking it has something to do with a recent Microsoft update.
Has anyone experienced anything similar. Also does anyone know if additional paper sizes can be added to the XPS driver. If you can, how?
I did a couple of searches of the error yesterday while at the customer yesterday. Most of what I found were other people with a similar error using another software with no solutions posted. One from a number of years ago did mention that .NET on the computer might have been updated to 3.0 without also installing MSXML6. I thought about downloading MSXML6 but due to to age of the post decided to wait until I did some further checking as 6 might not be the latest version of MSXML.
Has anyone experienced anything similar. Also does anyone know if additional paper sizes can be added to the XPS driver. If you can, how?
I did a couple of searches of the error yesterday while at the customer yesterday. Most of what I found were other people with a similar error using another software with no solutions posted. One from a number of years ago did mention that .NET on the computer might have been updated to 3.0 without also installing MSXML6. I thought about downloading MSXML6 but due to to age of the post decided to wait until I did some further checking as 6 might not be the latest version of MSXML.
↧
Work Underway to Prepare for Initial Cultivation of Hemp at Medbox Property in Pueblo
(PR-inside.com) FSCwire / Press ReleaseThe following press release was disseminated by FSCwire for Medbox Inc.--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---Los Angeles, California (FSCWire) - Medbox Inc. (OTCQB:MDBX). has issued a press release with the following headline:Work Underway to Prepare for Initial Cultivation of Hemp at Medbox Property in Pueblo, ColoradoTo view this press release on the FSCwire website, please either click on the link below, or copy and paste the link into your browser:FSCWire - you would prefer, you ..
More...
More...
↧
CQ konica bizzhub 1050,backround
Hi! Im having trouble with a 1050bizzhub.The machine printing a strength backround in all area of paper.
I replaced before 4k copies drum,developer,charging wire and grid
Yesterday i replaced the corona unit with another and also the dev.unit,but nothing changed!!!!!
I replaced before 4k copies drum,developer,charging wire and grid
Yesterday i replaced the corona unit with another and also the dev.unit,but nothing changed!!!!!
↧
↧
Problems after installing PS option
I have a customer who has just purchased and installed the PostScript option for their MPC6003, now they have image quality problems when printing PS (using the PS driver or printing the PS font list from the internal memory).
The firmware is up to date, and the PS card is M3, which, according to the manual, is the correct card for this model.
See scans of the prints that were done using the driver and internal memory, also the config page and diagnostic sheet
PLA1a.jpgPLA2a.jpgPLA3a.jpgPLA4a.jpgPLA5a.jpgPLA6a.jpg
The firmware is up to date, and the PS card is M3, which, according to the manual, is the correct card for this model.
See scans of the prints that were done using the driver and internal memory, also the config page and diagnostic sheet
PLA1a.jpgPLA2a.jpgPLA3a.jpgPLA4a.jpgPLA5a.jpgPLA6a.jpg
↧
Muratec 2850 error code 12
Hello
I am a service tech and I was hoping that you might walk me through clearing and or fixing the error code "service call ;12" how do I get into service mode to clear and what does that code mean?
Thank You
Glen
I am a service tech and I was hoping that you might walk me through clearing and or fixing the error code "service call ;12" how do I get into service mode to clear and what does that code mean?
Thank You
Glen
↧
User authentication Issue MP 2851.
hello guys and girls (Debby's).I'm setting up windows user authentication in a client that has 8 MP 2851 installled, Every machines is work pretty good except one, same model, same configuration, even default data at service mode are the same, but this bitch won't show login page at Copy window or document server or printer, only asking to login in scanner, i'm doing exactly the same that I do with all others, update firmware and nothing seems to able login screen at copy window.
↧
IC305 with FACI kit dont run after several years
Have a customer with IKON Cpp650 pro (bizhub pro c6500 at minolta) and Fiery 80pro (IC305 at minolta).
Faci Kit included.
Machine works, Fiery starts into usershell, Fiery.exe sends failuremessage and the Fiery shuts down.
System runs für several years with V3.0 free of trouble.
Now first trouble was, cWS cant connect to Fiery.
As i got to the scene, , the lcd show "starting up" without ending it.
The command workstation on Display schows, cant connect to maschine, IP was in XP ok, looking into network was also ok. "IPconfig" was also ok.
Tried new Systemsoftware first 3.0, then 2.1 and again 3.0
Always with after System install, the corect-Usersoftware.
It was a desaster, i spend a Day and the hole night, to download the iso images and burn them to DVD.
As result, Fiery starts, the XP environment starts, after login the top line for the Server never goes to green. After some Minutes, "Fiery.exe" was stopped by system.
It seemed like the Software is OK, but the Video interface is not good as well.
I took out the cable to C6500 and notings chanched.
Normaly got "check power of copier and cable to copier".
That doesnt happened.
After Call with KM-Germany, i decided to order a new Video card (Interface card to copier).
Hope this will run.
As far, as i remmber, in former times the interfacelines between Copier and Fiery are different connected inside the connectors.
Have badly impressions with Canon/Agfa, Minolta/Develop etc.
Hope this will work tomorrow, if someone have a hint, your welcome.
If that bloddy stuff works, i will give report.
greetings peter
PS: if here german members are active, where can i get the IC305-V3.0a Systemsoft.iso instead of the official V3.0 from KM-Technician website ?
Faci Kit included.
Machine works, Fiery starts into usershell, Fiery.exe sends failuremessage and the Fiery shuts down.
System runs für several years with V3.0 free of trouble.
Now first trouble was, cWS cant connect to Fiery.
As i got to the scene, , the lcd show "starting up" without ending it.
The command workstation on Display schows, cant connect to maschine, IP was in XP ok, looking into network was also ok. "IPconfig" was also ok.
Tried new Systemsoftware first 3.0, then 2.1 and again 3.0
Always with after System install, the corect-Usersoftware.
It was a desaster, i spend a Day and the hole night, to download the iso images and burn them to DVD.
As result, Fiery starts, the XP environment starts, after login the top line for the Server never goes to green. After some Minutes, "Fiery.exe" was stopped by system.
It seemed like the Software is OK, but the Video interface is not good as well.
I took out the cable to C6500 and notings chanched.
Normaly got "check power of copier and cable to copier".
That doesnt happened.
After Call with KM-Germany, i decided to order a new Video card (Interface card to copier).
Hope this will run.
As far, as i remmber, in former times the interfacelines between Copier and Fiery are different connected inside the connectors.
Have badly impressions with Canon/Agfa, Minolta/Develop etc.
Hope this will work tomorrow, if someone have a hint, your welcome.
If that bloddy stuff works, i will give report.
greetings peter
PS: if here german members are active, where can i get the IC305-V3.0a Systemsoft.iso instead of the official V3.0 from KM-Technician website ?
↧
↧
Samsung CLP660 RESET transfer belt
Friends, I need help.
Does anyone know further you can reset the model in CLP-660ND, the transfer belt?
Does anyone know further you can reset the model in CLP-660ND, the transfer belt?
↧
Canon Laser Class 830i Log question
So I have a customer that has ordered one of these out of our supply catalog (which I sooo much love the crap out of the supply catalog). They want a way to either email or ftp the log automatically to there server will this machine do that(please say no please say no)
Thanks
Scott
Thanks
Scott
↧
Toner Compatibility... C6501
I still have a C6501 in production...
i use TN610, TN612 (the right toner) and have used the OCE versions CS665 and 655 without any issues....
has anyone tried the IKON version?
Used int eh CCP 560/660
i know IKON uses there own boards that are modified w/ there own firmware whereas OCE just rebranded Konica's boxes.
thanks,
i use TN610, TN612 (the right toner) and have used the OCE versions CS665 and 655 without any issues....
has anyone tried the IKON version?
Used int eh CCP 560/660
i know IKON uses there own boards that are modified w/ there own firmware whereas OCE just rebranded Konica's boxes.
thanks,
↧
DF-701
We sold a BH454e to a customer and it turned out they didn't need the DF-701 document feeder.
I installed the DF-701 on a C364 and it codes C-C165 and C-6001.
Yes, the ribbon cable in in the correct position. I have tried installing firmware and it will not load the DF-701 version.
There is not an ADF selection page in service mode, it is supposed to select it automatically.
Does anyone know if the standard DF-701 is different than the optional DF-701?
Unfortunately we didn't test the DF on the BH454e when we set up the machine.
Any help is appreciated.
I installed the DF-701 on a C364 and it codes C-C165 and C-6001.
Yes, the ribbon cable in in the correct position. I have tried installing firmware and it will not load the DF-701 version.
There is not an ADF selection page in service mode, it is supposed to select it automatically.
Does anyone know if the standard DF-701 is different than the optional DF-701?
Unfortunately we didn't test the DF on the BH454e when we set up the machine.
Any help is appreciated.
↧
↧
KONICA BIZ HUB 754
Installation of FK 511 fax unit...phone line good..dials number before documents get pulled in!
↧
Biz Hub 654
Error 9401 lamb...anything to add ...not sure on parts!
↧
Toshiba eStudio 4520C
This machine is constantly going into warm-up and will stay there for about 15-20 minutes. I am suspecting it is possibly something with the fuser either a lamp is going out or a thermistor. Has anyone seen this problem before. Thanks in advance
↧
420i - intermittent C4100
Several months ago this machine came up with a C4100. I ended up replacing the LSU with a known working one out of another machine. It has run fine until about a week ago when the C4100 appeared again. I was able to reset it, but now the customer has called back and said the error has returned. I am going back out today to check the connections on the main pcb. Has anyone else seen this. Thanks in advance
↧
↧
Pro C5501
Hi All
have a problem with a double image, but only with colour, print and copy in mono and its fine, colour first page fine after that get some of first page image on second page and so on. tried different paper and print settings any help appreciated.
George
have a problem with a double image, but only with colour, print and copy in mono and its fine, colour first page fine after that get some of first page image on second page and so on. tried different paper and print settings any help appreciated.
George
↧
Ricoh spc240 & 242 fuser unit
Can I take a fuser unit from a spc240dn and fit it to a spc242sf?
↧
firmware versions
what is the most up to date firmware for TA250CI?
↧