Quantcast
Channel: Copytechnet.com
Viewing all 21005 articles
Browse latest View live
↧

Canon 2220I VS 2220L

January 12, 2017, 12:20 am
$
0
0
Hello Guys,

Normally i work on Ricoh Machines , but i wanted to know what are the difference between the Canon IR ADVC 2220I and Canon IR ADVC 2220L

what does the I mean and what does the L mean?

↧
Search

Error Code Ricoh 2035 Sc990 error first copy has ghost image

January 12, 2017, 1:38 am
$
0
0
Assalam Alykum

1. Machine giving sc990 error after some copies then i restart machine and it gives error again after some copies

2. i have cleaned Ld Unit so far

3. Now when i try to print copies counter machine gives error sc326 and prints a half printed page

4. in normal copies , copies has ghosting effect i am attaching the normal copy and counter list print

Please if anyone can guide me in right direction step by step300.jpg300 colo2r.jpg

Attached Images
↧
↧

Problem with oki C3520

January 12, 2017, 2:54 am
↧

250ci no black

January 12, 2017, 2:56 am
$
0
0
I started with a C7000 code. All toner motors and dev motors were turning. The black dev unit was full to the top of where toner enters the dev unit. I swapped dev unit from shop machine and the got dev motor code. Swapped out dev motor and code went away. Now I have no black output and its toner entrance area is packed as well. Im thinking maybe something in the dev drive is the culprit. I have never dug in and removed drive unit area for the dev and no instructions in this area in the serv manual. Anyone seen this before?

↧

sharp mx 5111n copier jamming frequently

January 12, 2017, 5:45 am
$
0
0
I have a sharp Mx-5111n that has a mx-fn11 finisher when duplexing occasionally i get a dogear fold towards lead edge front of paper and
it jams right at the entrance lever of finisher. I can sometimes run about 250 copies without a jam but once it starts it jams about every 25 copies. A few times I had to turn machine off and back on cuz it jammed at he registration sensor. Turning machine off seems to reset the sensor. When it jams I get a
FED_N code in test command 22-3. Sometimes there is a little tear in the paper but most times no tear but jamming at entrance of finisher. I don't see any problem by eyesight in paper path. Is there something I should be looking for a solution for the paper jams? Thanks for your help

↧
↧

Konica Bizhub C654 series

January 12, 2017, 6:04 am
$
0
0
We are starting to put out the Bizhub C654 in the field for rentals and sales. I was just wondering what kind of issues that have been found on these copiers. I saw a thread a while back on the Cyan developer does anyone know if this was ever resolved. So my main question is what are the field problems ya are seeing and how do you rate these machines thanks for your time.

↧

Sharp Receives Top Industry Ratings For Its Full Line Of Advanced And Essentials Colo

January 12, 2017, 6:11 am
$
0
0
Sharp’s new line of MFPs recognized for quality, reliability and ease of use by leading evaluator Buyers Laboratory LLC MONTVALE, N.J., Jan. 11, 2017 /PRNewswire/ —*Sharp Imaging and Information Company of America (SIICA), a division of Sharp Electronics Corporation (SEC) Continue reading Sharp Receives Top Industry Ratings For Its Full Line Of Advanced And Essentials Color Workgroup Document Systems→
The post Sharp Receives Top Industry Ratings For Its Full Line Of Advanced And Essentials Color Workgroup Document Systems appeared first on Industry Analysts, Inc..


More...

↧

I'm having another MP 3352 Doc Feed Problem...Doesn't see originals, sometimes

January 12, 2017, 6:17 am
$
0
0
This is the third time, all different machines, I've had issues with a 2852 / 3352 doc feeder.

This unit is not seeing the original, and it's so random.
With only 75K on it, seems too soon to have these issues.
It may go all day with no issues, then all of a sudden no original is seen.

I have been there when it happens though. I have cleaned all the sensors in the ADH.
Made sure the hanging flag the paper pushes out of the way is clean and working properly.
Opened the ramp (where the size sensors are) and cleaned the dust out.
Worked for a day and I get another service call about it.
Before I could get back to them they called and said never mind it's working again.

Is it possible the lower sensor back by the hinge is acting goofy?

I am starting to loose faith in these 2852 / 3352 off lease units I've been purchasing.

Thanks
Jeff in STL

↧
Search

IR ADV 8105 Pro is driving me crazy!!!

January 12, 2017, 6:22 am
$
0
0
Hello!
I got a problem when i print everything except scanned document.
I tried ufr2, pcl6, ps and everything else but still the same. When copy the image is perfect.
Changed primary charger corona and still no difference.
I had to format pc and reinstall windows(7 64bit) but the same. Had to upload original test and scanned test. The printed image is the same as original but faulty!
Please help me!
Ps. toner and parts are OEMs and printing scanned documents and text is perfect!
CANON imageRUNNER ADVANCE 8085, 8095, 8105 Series Service Manual.jpg20170112143846.jpg

↧
↧

Konica Minolta Bizhub 950 Developer replacement

January 12, 2017, 6:36 am
$
0
0
Hello Friends, we bought Konica Minolta Bizhub 950, and it is time to change Developer and Drum...
So we bought new parts (DRUM,DEVELOPER) and replace it...but we dont know how to finish Software initialization on it?

Does enyone know rigth steps to finish initialization? Thanks!

↧

Bizhub C35 random thin horizontal lines on copies

January 12, 2017, 6:39 am
$
0
0
To whom it may concern,

I'd like to ask for some advice regarding a strange issue I'm having with a Bizhub C35 machine. C35 thin horizontal lines.pdf

Some of the copies I make come out as shown in the attachment above. I'm suspecting an electrical malfunction but I'm unsure where to start looking. If any of you has encountered this problem before please relate.

Respectfully yours,
András (GOA)

Attached Files
↧

FX10

January 12, 2017, 6:47 am
$
0
0
Anyone have the procedure for the fuser reset on this one. thanks much

↧

Animation guide data for a C452

January 12, 2017, 6:55 am
$
0
0
Can anyone get me a copy of this to push to the machine?
Thanks!

↧
↧

Sharp MX-1810u

January 12, 2017, 6:56 am
$
0
0
client just recently replaced drum and developer from it... and toner replenishment's begun after it got an error F2-64. but then again client doesn't do anything on simulations. so when i get there i run simulations with 25-2 without toners and after simulations i inserted toners one after another checked black toner its good. checked developing unit at rear where toner goes in its full, i remove some of the toner on it... again after toner replenishment's Still F2-64 unit got only 35k black and 200k color.

what might be causing the problem?

or with this model of sharp when you replace drum need to replace developing unit as well? just asking!

↧

Service in progress

January 12, 2017, 7:42 am
$
0
0
I have a Toshiba es4540c. When we turn the machine on it displays an hourglass and has the message Service in Progress. Please do not turn off.04 After some time it will restart and the number at the end of the line changes. I have flashed it with the latest firmware 4132 and looked in the service manuals with no luck. Has anyone seen this?

Thank you in advance for any help.

↧
Search

Konica Minolta Bizhub C220 - Huge Black Stripes

January 12, 2017, 7:51 am
$
0
0
I have a Bizhub C220 that is working perfectly when suddenly it starts printing some huge black stripes that begins to fade after 2 prints and are gone by the 6th or 7th print.
This issue started 2 days ago and keeps happening at least 1 time a day. Apart when it happens, the printer is working great all day long, printing about 400 pages a day.

The attached page shows the issue, I scanned only the first page with the issue. This is an A4. The page before that was perfect and the next one has this issue but a little bit lighter, the next one gets lighter until it reaches the 7th page where there is no more stripes, only the perfect print. The document gets printed perfectly in all the pages, even the ones with stripes.

Some info on the machine:
Bizhub C220 from 2011
Total printed pages: 321k (color: 78k | bk: 243k)
Black DR: 47%
Black DV: 54%

Attached Images
↧

Ricoh Engagement Marketing Executive Symposium fosters conversations on print’s role

January 12, 2017, 8:41 am
$
0
0
MALVERN, Pa., Jan.*12, 2017 /PRNewswire/ —*Ricoh today announced that its first-ever Engagement Marketing Executive Symposium, held at its Executive Briefing Center in Boulder, Colo, brought in resounding accolades from*attendees. Against a backdrop of mountains, executives from around the globe gathered Continue reading Ricoh Engagement Marketing Executive Symposium fosters conversations on print’s role in an omnichannel world→
The post Ricoh Engagement Marketing Executive Symposium fosters conversations on print’s role in an omnichannel world appeared first on Industry Analysts, Inc..


More...

↧
↧

New small-footprint MFP and printer series helps Ricoh customers share information an

January 12, 2017, 8:41 am
$
0
0
New device series boasts high speeds, high volumes and robust feature set in a compact package at an affordable price point MALVERN, Pa., January 12, 2017 – Ricoh USA, Inc. today unveiled its latest black-and-white device series to help small Continue reading New small-footprint MFP and printer series helps Ricoh customers share information and complete tasks quickly and easily→
The post New small-footprint MFP and printer series helps Ricoh customers share information and complete tasks quickly and easily appeared first on Industry Analysts, Inc..


More...

↧

New Ricoh MFP delivers fast print speed, added productivity and reliability in compac

January 12, 2017, 8:41 am
$
0
0
Ricoh’s Workstyle Innovation Technology brings familiar business tools together with RICOH Smart Device Connector to make sharing information quicker and easier MALVERN, PA, January 12, 2017 – Ricoh USA, Inc. today unveiled its latest black-and-white multifunction printer (MFP) designed to Continue reading New Ricoh MFP delivers fast print speed, added productivity and reliability in compact device→
The post New Ricoh MFP delivers fast print speed, added productivity and reliability in compact device appeared first on Industry Analysts, Inc..


More...

↧

Konica Minolta partner launches crowdsourced mini IPO

January 12, 2017, 8:41 am
↧
Viewing all 21005 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>