I have a kyocera 4551ci its displaying Time for maintenance T and error code C0840 I have executed U906 but the some error code is coming back what could be the problem
↧
Error Code maintenance T
↧
Bizhub C227 scew adjustment
Hi!
I have some issues with the Bizhub C227.
The customer complaining about scew copies and scan from the document feeder.
I have tried the automatic feed adjustment, and adjusted the screw on the right hinge, but it doesn't help.
I have adjusted the scanner scew, so the copy from the glassplate is perfect.
Does any other of you have the same problem with this machine.
I have some issues with the Bizhub C227.
The customer complaining about scew copies and scan from the document feeder.
I have tried the automatic feed adjustment, and adjusted the screw on the right hinge, but it doesn't help.
I have adjusted the scanner scew, so the copy from the glassplate is perfect.
Does any other of you have the same problem with this machine.
↧
↧
MPC 305 SC682-11/ SC325
We have a mpc305 with sc325 and 682-11 from time to time we have changed the toner board at the rear of the copier and change the black pcu but a month later it has come back again anyone had this or got any advice thanks
↧
TASKalfa 3051ci error C2840
Hi Guys,
I have a problem with a TASKalfa 3051ci. Initally sometimes, now often give error C2840.
I have already clean the transfer belt cleaning section and the waste toner cleaning pipe.
I manually rotate transfer belt cleaning motor and I did not notice a unusually load. Turning is soft!
What can I do? Any ideas?
Thank you in advance,
Kyove
I have a problem with a TASKalfa 3051ci. Initally sometimes, now often give error C2840.
I have already clean the transfer belt cleaning section and the waste toner cleaning pipe.
I manually rotate transfer belt cleaning motor and I did not notice a unusually load. Turning is soft!
What can I do? Any ideas?
Thank you in advance,
Kyove
↧
Part Number Help MXM314N and MX4140
Hi All
Can anyone help im looking for the part numbers for the touch screen
for MXM314N and MX4140 had 2 arrive with cracked touch screens
both LCD's are good just the front touch screen required
Thanks
Can anyone help im looking for the part numbers for the touch screen
for MXM314N and MX4140 had 2 arrive with cracked touch screens
both LCD's are good just the front touch screen required
Thanks
↧
↧
turn on the vendor unit on a Konica Minolta Bizhub C200
How to clear turn on the vendor unit on a Konica Minolta Bizhub C200.
unable to enter service mode asking for password when input the password and press ok again come back to the same message instead of going to service mode...turn on the vendor unit...
any Idea
Thanks
unable to enter service mode asking for password when input the password and press ok again come back to the same message instead of going to service mode...turn on the vendor unit...
any Idea
Thanks
↧
HP LJ 4250 returning maint. code
Hi Folks,
I have an HP LJ 4250 that the maint. light keeps coming back on, I've done numerous maint. kits, and clean the codes, but 2 weeks later the
maint. light comes back on...?...memory issue somewhere..?...any help appreciated..
Thanks... !!
Jaime
Indep. Copier Svc.
I have an HP LJ 4250 that the maint. light keeps coming back on, I've done numerous maint. kits, and clean the codes, but 2 weeks later the
maint. light comes back on...?...memory issue somewhere..?...any help appreciated..
Thanks... !!
Jaime
Indep. Copier Svc.
↧
Light K tones not printing on C6500
The k prints 100% solid very well but lower percentages of k tones prints very light. You have to make it up to 60% to see any black print. The black is almost completely blank for lower percentages than 60%. The other colors are printing well. The IPB, K Write unit and Write unit cables have been replaced without any resolution.
↧
sharp fn17 finisher needed
I have a sharp mx3610 with roll up finisher with way to many problems. Does anyone have a internal finisher for this machine at a good price for sale. Thanks
↧
↧
Miscellaneous bizhub 223 - Not possible to scan more than 4 originals to SMB or USB-Stick
Hello,
a bizhub 223 shows the following problem:
It's not possible, to scan (over DF 621) more than 4 originals to SMB or USB-Stick. Afterwards the machine stops. On the display, the message "deleted due to error" appears.
In copy-mode, this error doesn't occur. All originals are fed and printed out.
I replaced the DF621, the same error occurred.
What else could cause this phenomenon?:confused:
a bizhub 223 shows the following problem:
It's not possible, to scan (over DF 621) more than 4 originals to SMB or USB-Stick. Afterwards the machine stops. On the display, the message "deleted due to error" appears.
In copy-mode, this error doesn't occur. All originals are fed and printed out.
I replaced the DF621, the same error occurred.
What else could cause this phenomenon?:confused:
↧
How to change language on Konica Minolta bizhub C360
Hi.
I have a bizhub C360 model with an English language, when i want to change the language i get only options for English, Četina, Polski, Slovensky.
I need the Slovene language, how can i change that, I know that is possible, because I saw that language at the same model on other machine.
Thank you for all the help.
I have a bizhub C360 model with an English language, when i want to change the language i get only options for English, Četina, Polski, Slovensky.
I need the Slovene language, how can i change that, I know that is possible, because I saw that language at the same model on other machine.
Thank you for all the help.
↧
How employers use H-1Bs for hard-to-fill positions
President Trump has called for a "Buy American and Hire American" policy that would tighten the availability of H-1B visas and crack down on what he termed "fraud and abuse." WEST PALM BEACH, Fla.>> Corporate titans NextEra Energy, Office Depot and Jarden Corp. use the H-1B visa program to hire skilled foreign workers in Palm Beach County.
More...
More...
↧
View Press Release
The results are scheduled to be released at 4:00 p.m. ET, followed by an investor presentation and conference call at 4:30 p.m. ET. PAR Technology President and Chief Executive Officer Dr. Donald Foley, Chief Financial Officer Bryan Menar, Chief of Staff Karen Sammon and VP for Business & Financial Relations Christopher Byrnes, will provide a business update and address questions from call participants.
More...
More...
↧
↧
Highcon Returns to IADD FSEA Odyssey
Yavne, Israel, May 10, 2017; Highcon will be returning this year for the fourth time to the IADD FSEA Odyssey, being held this year from May 17-19 in Schaumburg, IL. * At this years event, Highcon will be showcasing not Continue reading Highcon Returns to IADD FSEA Odyssey→
The post Highcon Returns to IADD FSEA Odyssey appeared first on Industry Analysts, Inc..
More...
The post Highcon Returns to IADD FSEA Odyssey appeared first on Industry Analysts, Inc..
More...
↧
ECS Executive panel with HP, Lexmark, Muratec, Sharp and Konica Minolta
Rick Taylor Pres/CEO KM, Doug Albregts Pres/CEO Sharp, Jim D’Emidio Pres Muratec, Phil Boatman from Lexmark and Mimi Everson from HP are on a panel together talking about the industry and where their respective companies are going. Rick tells Mimi Continue reading ECS Executive panel with HP, Lexmark, Muratec, Sharp and Konica Minolta→
The post ECS Executive panel with HP, Lexmark, Muratec, Sharp and Konica Minolta appeared first on Industry Analysts, Inc..
More...
The post ECS Executive panel with HP, Lexmark, Muratec, Sharp and Konica Minolta appeared first on Industry Analysts, Inc..
More...
↧
Ecosys M6535cidn Pauses after two or three pages print
I have a ecosys 6535cidn that when printing from the main tray (making copies or printing from the network.) will pause after 2 or 3 pages exit the machine. It continues to spool as if it were re calibrating or adding toner but no message states that is what it is doing. It will come out of the multi purpose tray fine. It never jams. I have checked the sensors they all seem fine. I have tried a new feed drive assembly, kyocera suggested a main board that did not help. Ive tried a new black dv as it happens with both color and black and white. Ive tried the fuser even. Any suggestions on this would be very appreciated.
↧
Error Code Embedded Fiery on copier shows "FF", won't boot up
When I boot up successfully, usually i see "00" on the Fiery itself. However, I tried booting it up this time and it shows "FF". I have already tried powering it down and back up several times and each time it still shows "FF". When it shows "FF", i cannot connect to the copier.
What could be causing this?
What could be causing this?
↧
↧
Miscellaneous Ricoh Aficio 2035
Why would toner motor not turn when in print mode yet do so in copy mode???
Thanks???
Thanks???
↧
Miscellaneous KM2550
Registration on top drawer is off consistently feeding too fast, 2nd drawer is correct. Fuser is also causing a cq issue. Could there be a relationship between the fuser and the registration problem???
Thanks!!!
Thanks!!!
↧
Toshiba e-studio 456 Fax confirmation page
The machine print the confirmation page, the sender info is good.
the problem: there is no information on the destination, no time of sending, no fax number it sent to.
All the items next to the page sending data is blank, also there is no copy of the 1st page - it is blank too.
Any idea?
Thanks
the problem: there is no information on the destination, no time of sending, no fax number it sent to.
All the items next to the page sending data is blank, also there is no copy of the 1st page - it is blank too.
Any idea?
Thanks
↧