We have a machine throwing this error at boot E000000-0001, i tested with another two different fuser units and both worked OK, prints and works just fine, and as soon as i put back the original fuser it throws the same error again.
Tried this same fuser on anothjer 2 machines and they both got the same error so im pretty sure the problem is within this fuser unit.
So far ive inspected everything and it seems to be just fine, client says it was working fine on the morning and by late afternoon it stopped working, ive found a jammed sheet when i first opened it up and i thought that was the cause but it wasnt.
Film looks fine, it is rotating and the white dot is on the gear side so i can rule that out, connections and cables look also fine, no dents or charred cable. Nothing seems broken, so my guess is the problem lies within the electrical components.
So, before i start juggling parts from one fuser to the other, any advice as to what should i chek first? could the resistors on the aluminum cleaning roller or the ones on the side of the pressure roller cause this error? i can think of that and also the actual heating element being broken.