↧
Miscellaneous How to adjust skew error on MP C6000
↧
intermittent c0211 code on konica-minolta c280
Hello there.
We are having c0211 when printing from bypass.....just replaced the clutch and cleaned the sensor.....but no response,,,any ideas......????
Thanks a lot
We are having c0211 when printing from bypass.....just replaced the clutch and cleaned the sensor.....but no response,,,any ideas......????
Thanks a lot
↧
↧
julius
What should I do I have a print 1075 I found that the harddrive has failed. Tried removing it from the machine put it in the casing connected on the computer but still there is no rotation from the hard drive. what version of lunix do I need to install on the hdd since I can't get support from.oce. any help will be appreciated
↧
ar_m350 errors
Hi friends
I need your help, if someone already saw a issue like this:
I havê a ar_m350n that is giving me two errors, H2_00 and f2-39.
Of corse i already chek the termistor, test with another fuser unit, with another
OPC drum unir, and another PS roller unir to.
The funny thing is if i disconet the scanner unit the copier works OK as a printrr, not errors????
Of cores i already test the scanner in another copier and is OK, in sameway i test another scanner in a detetive copier, and give me erros to.
Already test with another main power suply, not fix to
Só, someone already saw something this?
Thank you very much
I need your help, if someone already saw a issue like this:
I havê a ar_m350n that is giving me two errors, H2_00 and f2-39.
Of corse i already chek the termistor, test with another fuser unit, with another
OPC drum unir, and another PS roller unir to.
The funny thing is if i disconet the scanner unit the copier works OK as a printrr, not errors????
Of cores i already test the scanner in another copier and is OK, in sameway i test another scanner in a detetive copier, and give me erros to.
Already test with another main power suply, not fix to
Só, someone already saw something this?
Thank you very much
↧
HP Fuser Film Sleeve
Can I use the same film used in the P4014 fuser unit in the LJ4250 Fuser unit?
↧
↧
Miscellaneous Image Shift on IR3235 top to bottom only when scanning
I have IR3235 that have image shift problem only when scanning, either from glass or ADF. The image shift is about 2mm at top of page that results in grey background on scanned image on customer PC.
Copying/Printing and engine PG are fine. What settings are there to correct top to bottom misregistration. NB: The grey band at the top comes ONLY for scan to folder, copy, print and internal prints are all okay. Thanks.
Copying/Printing and engine PG are fine. What settings are there to correct top to bottom misregistration. NB: The grey band at the top comes ONLY for scan to folder, copy, print and internal prints are all okay. Thanks.
↧
Miscellaneous Bizhub C450, anyone sell a paper path roller kit? without ordering individual parts?
Bizhub C450, anyone sell a paper path roller kit without ordering individual parts?
or a basic refurbish kit?
unit has 624,000 copies on it 1/3 color
or a basic refurbish kit?
unit has 624,000 copies on it 1/3 color
↧
Miscellaneous Konica Minalta Bizhub C450 exp network Tech in S Central MichTri-state area Hillsdale
Looking for an Konica Minolta Tech Experienced with the Bizhub C450 and MS Win Server 2012 network
in the South Central Michigan Tri-state area specifically Hillsdale Michigan
I do not have time to learn all the nuances on how to add the Bizhub C450
to Win Server 2012 standard network. 5 stations running win 8 or win 7.
Unit does have fiery, which I disconnected due lack of software to re-install.
can work on it anytime convenient weekends, nights, days after April 15th 2015
email or text/VM 517-474-2398
in the South Central Michigan Tri-state area specifically Hillsdale Michigan
I do not have time to learn all the nuances on how to add the Bizhub C450
to Win Server 2012 standard network. 5 stations running win 8 or win 7.
Unit does have fiery, which I disconnected due lack of software to re-install.
can work on it anytime convenient weekends, nights, days after April 15th 2015
email or text/VM 517-474-2398
↧
ir 5055
hi,
I need to clear the password mail box ir 5055
"copier- fonction- clear- PWD-CLR" does not change
I need to clear the password mail box ir 5055
"copier- fonction- clear- PWD-CLR" does not change
↧
↧
Bizhub C451 - copies wrinkled & Ilde noise - squeaking and knocking noise
Hello All,
Bizhub C451 - Copies wrinkled. (See attached Pics).
I tried this from the thread:
http://www.copytechnet.com/forums/ko...ing-paper.html
Images:
http://s29.postimg.org/fqxx8adk7/201...41_resized.jpg
http://s28.postimg.org/uwhyywjzh/201...24_resized.jpg
Also when Idle I hear weird noice.. doesn't appear like the famous fuser noise.
It is weird squeaking and knocking nise..
I tried this thread solution too no help:
http://www.copytechnet.com/forums/ko...451-noise.html
Here is the video:
http://tinypic.com/r/so8kko/8
Any help on both the issues is much appreciated.
Bizhub C451 - Copies wrinkled. (See attached Pics).
I tried this from the thread:
http://www.copytechnet.com/forums/ko...ing-paper.html
Images:
http://s29.postimg.org/fqxx8adk7/201...41_resized.jpg
http://s28.postimg.org/uwhyywjzh/201...24_resized.jpg
Also when Idle I hear weird noice.. doesn't appear like the famous fuser noise.
It is weird squeaking and knocking nise..
I tried this thread solution too no help:
http://www.copytechnet.com/forums/ko...451-noise.html
Here is the video:
http://tinypic.com/r/so8kko/8
Any help on both the issues is much appreciated.
↧
E-studio 281c jamming on exit
Hi Guys,
I have a customer who has a 281c which is jamming on the exit. It appears that the exit rollers have been baked by the fuser over time and they've gone really hard. If you grab the paper and pull it out as it is exiting then it doesn't jam. Has anyone else seen this happen on this model?
I dont have access to a parts guide for this model either,can you get the exit rollers as part of an assembly or are they individual parts? If anyone happens to know the part number of these rollers that would be awesome.
Thanks in advance!
Brad
I have a customer who has a 281c which is jamming on the exit. It appears that the exit rollers have been baked by the fuser over time and they've gone really hard. If you grab the paper and pull it out as it is exiting then it doesn't jam. Has anyone else seen this happen on this model?
I dont have access to a parts guide for this model either,can you get the exit rollers as part of an assembly or are they individual parts? If anyone happens to know the part number of these rollers that would be awesome.
Thanks in advance!
Brad
↧
Aficio 2051 maintenance and innitilize /reset
Tomorrow i will be changing drum, blade, brush , developer on aficio 2051 and unsure of sp resets after installing. I see that 7804 is maintenance counter reset but are there also individual resets or innitializing for drum and developer. I had recently done dv change on an mp2550 and remember doing sp2802 or 2803. Please advise as I've had little sleep and don't seem to be finding other sp modes related to this in the sm. Frank/Action Photocopy
↧
Miscellaneous Canon IR5075; I cannot access Additional Function in control panel;
I have tried more times to access the additional function in control panel, however there is no action even when the butom press for a few seconds.
Please everyone show me how, thanks.
Please everyone show me how, thanks.
↧
↧
Error Code Konica Minolta C452 C225B
We are getting C225B in Konica Minolta C452. After reset it works for couple of days and reappears.
We have noticed one thing whenever this code appears there is misfed in Exit Drive Assembly and when we print Duplex Jobs.
Exit assembly can cause this problem? Because There is always misfed one in Exit Assembly, one in Duplex Unit and one misfed in the tray under pickup rollers.
Please advise.
Thanks and Kind Regards,
Mearmi
We have noticed one thing whenever this code appears there is misfed in Exit Drive Assembly and when we print Duplex Jobs.
Exit assembly can cause this problem? Because There is always misfed one in Exit Assembly, one in Duplex Unit and one misfed in the tray under pickup rollers.
Please advise.
Thanks and Kind Regards,
Mearmi
↧
Canon Advance C9075 error E004-0101, please help me
My machine got error E004-0101 when power up. I replace DC board but still error. I also replace fixing unit but no change. Please help me
↧
Ericsson joins forces with Scania and Royal Institute of Technology in transport lab
(PR-inside.com)
* Joint lab will explore future transport solutions as part of Ericsson's 5G strategy * Project is part of "5G for Sweden" inititative Ericsson (NASDAQ:ERIC) has announced that it is to join forces with Scania and Sweden's Royal Institute of Technology (Kungliga Tekniska Högskolan, known as KTH) in their Integrated Transport Research Lab (ITRL) to explore the transport solutions of the future. The joint initiative, which will explore areas such as autonomous buses and improved systems for traffic management, forms part of the "5G for Sweden" program that was announced in March. The partnership will feature technology experts from Ericsson, leading scientists from KTH and ..
More...
* Joint lab will explore future transport solutions as part of Ericsson's 5G strategy * Project is part of "5G for Sweden" inititative Ericsson (NASDAQ:ERIC) has announced that it is to join forces with Scania and Sweden's Royal Institute of Technology (Kungliga Tekniska Högskolan, known as KTH) in their Integrated Transport Research Lab (ITRL) to explore the transport solutions of the future. The joint initiative, which will explore areas such as autonomous buses and improved systems for traffic management, forms part of the "5G for Sweden" program that was announced in March. The partnership will feature technology experts from Ericsson, leading scientists from KTH and ..
More...
↧
xerox workcentre 7132
anyone encounter misalignment for above model?
↧
↧
Canon C7055 got error E020-0081 please help
Please help me this error E020-0081 on Canon C7055
↧
452 unmatch update fail
Unmatch update fail reboot the machine 4+9 does not work also 0+8 on toshiba e studio 452
1- hdd change
2- ic on sis board change
1- hdd change
2- ic on sis board change
↧
Ricoh MPC4502
Hi guys,
Thanks for all your help again.
Got a call from a customer saying, all 4 paper trays not picking up paper except from bypass tray.(Ricoh MPC4502)
Will this be just a sensor issue or a motor fault?
Just trying to get some thoughts before going to site as its a 4hr-drive from work.
Thanks for all your help again.
Got a call from a customer saying, all 4 paper trays not picking up paper except from bypass tray.(Ricoh MPC4502)
Will this be just a sensor issue or a motor fault?
Just trying to get some thoughts before going to site as its a 4hr-drive from work.
↧