Printing completely black copies. changed toner cartridge but no improvement. I think it is the laser scanner
↧
hp p1102 black copies
↧
Error Code Kyocera KM-5035 Finisher. Screen says: Attach finisher and close finisher door.
The screen says to attach the finisher and to close finisher door however the finisher is attached and the door is closed.
↧
↧
Windows 7: Scan to smb standard user account
I know how to setup scan to smb.
I was having some issues setting it up with a standard user account...
I left it for the Network Person to figure out...
My thinking is that I would need an admin account on the pc for the scanning....
I am going to experiment with this tomorrow so I will update as I check it out...
please advize as to best approach...
throw me a link to any threads that you feel are related...
I was having some issues setting it up with a standard user account...
I left it for the Network Person to figure out...
My thinking is that I would need an admin account on the pc for the scanning....
I am going to experiment with this tomorrow so I will update as I check it out...
please advize as to best approach...
throw me a link to any threads that you feel are related...
↧
Dead Machine Docucolor 240
Hello everyone, while updating the firmweare my docucolor 240 went wrong and since then no longer loads. The progress bar stops at the first and only DAFTgoes up and down. The DC240 will not start with no alternate boot.
I mounted MCU PWB NVM (IOT), ESS PWB NVM (SYS2), EEPROM (SYS 1) HDD and a printer DocuColor 250. I did the procedure Machine ID / BILLING Date Setting putting in place Serial Number, Product Number and Billing Data . I initialized the partition in HDD and initialize the NVM with PWS Diagnostic mode and gave me error Controller, SYS-User and Sys-Sistem. How can I fix the problem? If you must install Firmweare again, can someone help me as it is not in my possession?
What I need it is:
ESS: 1.231.16
IOT: 8.32.0
ITT: 11.56.1
ITT D: 12.3.2
ADF: 11.8.0
and that of the Finischer.
Thanks and sorry for my English.
I mounted MCU PWB NVM (IOT), ESS PWB NVM (SYS2), EEPROM (SYS 1) HDD and a printer DocuColor 250. I did the procedure Machine ID / BILLING Date Setting putting in place Serial Number, Product Number and Billing Data . I initialized the partition in HDD and initialize the NVM with PWS Diagnostic mode and gave me error Controller, SYS-User and Sys-Sistem. How can I fix the problem? If you must install Firmweare again, can someone help me as it is not in my possession?
What I need it is:
ESS: 1.231.16
IOT: 8.32.0
ITT: 11.56.1
ITT D: 12.3.2
ADF: 11.8.0
and that of the Finischer.
Thanks and sorry for my English.
↧
CQ Canon Adv C5035
Hi guys,
Seems to have a density issues even after change of drum and developer unit.
The colors can't seems to get solid, esp on color shading. Pls see attached.
Prints of full color will result in patches of white (powdery pattern) on solid colors.
Steps done:
1. change of original drum and developer unit.
Have i missed out any steps or did i replace the wrong parts?
Could it be the ITB belt and transfer cleaner?
Any settings to be done?
Thank you and hope to hear from you guys soon!
Seems to have a density issues even after change of drum and developer unit.
The colors can't seems to get solid, esp on color shading. Pls see attached.
Prints of full color will result in patches of white (powdery pattern) on solid colors.
Steps done:
1. change of original drum and developer unit.
Have i missed out any steps or did i replace the wrong parts?
Could it be the ITB belt and transfer cleaner?
Any settings to be done?
Thank you and hope to hear from you guys soon!
↧
↧
SC240-4
I accidently erased all memory with sp.5801-1 on Mpc.3503, I had put back all data from Birth certificate, but I still got sc240-4 ( LD error for Margenta ). I replace new laser unit, followed Manual for laser installation specific for Mpc 3003 and 3503, but when I import data from laser unit to copier sp.2110-005 It failed to write, so Sc240-4 still not clear, trouble shooting recommend to replace IPU, but I am not sure will fix in this case. I wonder when I write new data from Laser unit where it will go NV ram, BICU , IPU... ? Someone have a glue ?
↧
Canon IPF8100 Help needed with an error code PLEASE
Hello.
I have had an error code on the above printer 03130031-2F17 which i believe is an error with the suction fan, I have purchased a new replacement that has come direct from Canon, i have installed this and i am still getting the same error, i have removed the new fan and looked inside when trying to start the printer and the fan doesn't even spin before the error comes up.
I have looked in the service manual and it shows that on the main control board the it is the J2701 connection that provides power and sends and recieves the control signal, on this connection it is pin B1 +26V and A1 = GND.
can anyone let me know if there is anything that I can do to get this fan working. also is there anyone that knows if the main control board is at fault and if it can be repaired.
Thanks for your time.
I have had an error code on the above printer 03130031-2F17 which i believe is an error with the suction fan, I have purchased a new replacement that has come direct from Canon, i have installed this and i am still getting the same error, i have removed the new fan and looked inside when trying to start the printer and the fan doesn't even spin before the error comes up.
I have looked in the service manual and it shows that on the main control board the it is the J2701 connection that provides power and sends and recieves the control signal, on this connection it is pin B1 +26V and A1 = GND.
can anyone let me know if there is anything that I can do to get this fan working. also is there anyone that knows if the main control board is at fault and if it can be repaired.
Thanks for your time.
↧
Sharp DX-310 jam in ByPass Tray
Hello
I am not technician. I am learning myself how to repair mfp printers.
I have Sharp DX-C310 which show misfeed when printing from manual feed tray. It drags the paper in 80-90% (picture 1).
Removed paper is curled (picture 2)
JAM code is MFT.
What should I check to find what cause jamming?
p1.JPGp2.JPGp3.jpgp4.jpg
Thanks
Jack
I am not technician. I am learning myself how to repair mfp printers.
I have Sharp DX-C310 which show misfeed when printing from manual feed tray. It drags the paper in 80-90% (picture 1).
Removed paper is curled (picture 2)
JAM code is MFT.
What should I check to find what cause jamming?
p1.JPGp2.JPGp3.jpgp4.jpg
Thanks
Jack
↧
Multi-Color Corporation Announces Higher Organic Growth and Margin Results for Fiscal
(PR-inside.com)
CINCINNATI, OHIO, June 5, 2015 - Multi-Color Corporation (NASDAQ:* LABL) fourth quarter core earnings per share increased 9% to $0.74 per diluted share from $0.68 in the prior year quarter. Fiscal 2015 highlights: "Fiscal 2015 achieved 4% organic growth and a 2% of revenues improvement in margins to 21% core gross margin and 13% core operating margin.* Core EPS increased to $3.20, up 50% over the prior year.* We have seen benefits from prior year improvement and integration activities.* This has resulted in a new minimum level of performance on which to build in fiscal 2016.* Plus stronger cash flow and lower leverage positions us well to further develop ..
More...
CINCINNATI, OHIO, June 5, 2015 - Multi-Color Corporation (NASDAQ:* LABL) fourth quarter core earnings per share increased 9% to $0.74 per diluted share from $0.68 in the prior year quarter. Fiscal 2015 highlights: "Fiscal 2015 achieved 4% organic growth and a 2% of revenues improvement in margins to 21% core gross margin and 13% core operating margin.* Core EPS increased to $3.20, up 50% over the prior year.* We have seen benefits from prior year improvement and integration activities.* This has resulted in a new minimum level of performance on which to build in fiscal 2016.* Plus stronger cash flow and lower leverage positions us well to further develop ..
More...
↧
↧
Error Code Bizhub pro C-5501
Hi guys.
Anyone can link me the latest firmwares for the C-5501
Error C-C131 after replacing the controler PCB.
Thanks in advance!
Anyone can link me the latest firmwares for the C-5501
Error C-C131 after replacing the controler PCB.
Thanks in advance!
↧
AR m550 n overfilled drawer
Having an issue with drawer #3. when drawer is installed display says it is overfilled, the drawer isn't even lifting. F3-32 error code is cleared error history cleared and checked for paper blockage of sensors and switches. Even tried another drawer. thanks for replys
↧
Miscellaneous Black and White demo page
Hi all
I have a C224e which is running all latest firmware and copies and prints fine but when you print a demo page it always comes out monochrome ???
Has anyone else had this ?
I have a C224e which is running all latest firmware and copies and prints fine but when you print a demo page it always comes out monochrome ???
Has anyone else had this ?
↧
Konica Minolta Builds Momentum and Strategic Growth with SymQuest Group Acquisition
Ramsey, NJ June 2, 2015 Konica Minolta Business Solutions, U.S.A., Inc., a leader in information management focused on enterprise content, technology optimization and cloud services today announced the acquisition of SymQuest Group.
The acquisition accelerates Konica Minoltas rapid growth with an increased presence in targeted geographic markets. As part of the agreement, SymQuest Groups headquarters will remain in South Burlington, Vermont and Westbrook, Maine, and will retain its 186 employees throughout various branch offices and data centers.
Tags:
Konica Minolta
More...
The acquisition accelerates Konica Minoltas rapid growth with an increased presence in targeted geographic markets. As part of the agreement, SymQuest Groups headquarters will remain in South Burlington, Vermont and Westbrook, Maine, and will retain its 186 employees throughout various branch offices and data centers.
Tags:
Konica Minolta
More...
↧
↧
Neopost USA Celebrates National Postal Worker Day in Appreciation
MILFORD, Conn. (June 1, 2015) Neopost USA, a mailing, business communications management and shipping hardware and software solutions expert, is proud to recognize the men and women of the United States Postal Service® on National Postal Worker Day, Wednesday, July 1.
Neopost USA, taking its second turn as the de facto host of National Postal Worker Day, invites Americans to share their personal stories of appreciation as well as their gratitude about their favorite postal worker at www.NeopostUSA.com/PostalWorkerDay. In a similar initiative last year, Neopost USA received hundreds of comments, likes and shares on Facebook from Americans who were happy and eager to share a wide range of reminiscences and acknowledge their relationship with an outstanding postal worker mail carrier, administrator or executive.
Tags:
Neopost
More...
Neopost USA, taking its second turn as the de facto host of National Postal Worker Day, invites Americans to share their personal stories of appreciation as well as their gratitude about their favorite postal worker at www.NeopostUSA.com/PostalWorkerDay. In a similar initiative last year, Neopost USA received hundreds of comments, likes and shares on Facebook from Americans who were happy and eager to share a wide range of reminiscences and acknowledge their relationship with an outstanding postal worker mail carrier, administrator or executive.
Tags:
Neopost
More...
↧
Copystar Introduces Two New Energy Efficient, Affordable ECOSYS Color Printers for Wo
FAIRFIELD, N.J. June 4, 2015 Copystar, a division of KYOCERA Document Solutions America and a leading document imaging company, today announced the launch of two new ECOSYS® color network printers, both of which pack an array of advanced features into a compact footprint. The ECOSYS P6035cdn and P6130cdn are designed for busy workgroups of all sizes; they come complete with standard duplex printing, enhanced paper capacity, and optional wireless printing capabilities. The ECOSYS P6035cdn and ECOSYS P6130cdn output vivid color or black-and-white pages at a speedy 37 pages per minute (ppm) and 32 ppm respectively.
As part of the Companys environmentally friendly ECOSYS line, both desktop color printers feature Kyoceras patented long-life drum technology. The eco-friendly drum design, which separates the toner container, allows users to replenish toner without sacrificing the drumthus reducing consumable costs and landfill waste. ECOSYS printers also conserve energy and associated costs by switching to standby mode when not in use.
Tags:
Copystar
More...
As part of the Companys environmentally friendly ECOSYS line, both desktop color printers feature Kyoceras patented long-life drum technology. The eco-friendly drum design, which separates the toner container, allows users to replenish toner without sacrificing the drumthus reducing consumable costs and landfill waste. ECOSYS printers also conserve energy and associated costs by switching to standby mode when not in use.
Tags:
Copystar
More...
↧
Miscellaneous Creating a booklet with KM 6500 with FS-607
Hi everyone,
I have been trying to create a saddle stitched book with my printer (I have a KM 6500 with FS-607 using IC-303 and am using OS X). I have looked all through the internet to find help and have had no luck.
I set up the print job once through Acrobat and once through CWS 5: I set the interior paper stock settings and than set up the layout booklet and sent to print. Both times it just printed normally, which is pretty disappointing. I know the system is functioning as I can run it through the multi folding unit and it will create a booklet but I rather set the job up at the computer and let it run while I do the rest of my daily job.
Any help, tips and suggestions I am so open for I really would love for this to work, instead of doing it the old fashion way.
THANKS!!!
I have been trying to create a saddle stitched book with my printer (I have a KM 6500 with FS-607 using IC-303 and am using OS X). I have looked all through the internet to find help and have had no luck.
I set up the print job once through Acrobat and once through CWS 5: I set the interior paper stock settings and than set up the layout booklet and sent to print. Both times it just printed normally, which is pretty disappointing. I know the system is functioning as I can run it through the multi folding unit and it will create a booklet but I rather set the job up at the computer and let it run while I do the rest of my daily job.
Any help, tips and suggestions I am so open for I really would love for this to work, instead of doing it the old fashion way.
THANKS!!!
↧
Maryland Tax Court: Staples owes $14M
The Maryland Tax Court has ruled that office-supply retailer Staples owes the state more than $14 million in back taxes. The Daily Record in Baltimore reported that the court found Staples underpaid its taxes between 1999 and 2004.
More...
More...
↧
↧
Error Code SC-355 - copying will start after warm up
Hello,
I have a MP 2851 that will log a SC-355 but will only show it in the Service Program mode.
The other thing it's doing is when HDD is connected it will come to ready but never make a copy.
When the HDD is removed it will always say "copying will start after warm up".
Help.
I have a MP 2851 that will log a SC-355 but will only show it in the Service Program mode.
The other thing it's doing is when HDD is connected it will come to ready but never make a copy.
When the HDD is removed it will always say "copying will start after warm up".
Help.
↧
disable Color copies and or color lock
Is there any where in the 5551ci copier where I can disable color by a hardware jumper? Or disable the auto color and full color button on the panel? What about the key counter port (YC25), can I deactivate color copies and enable them from this port?
thanks!!
thanks!!
↧
XEROX DOCUCOLOR 5252
Hey Guys,
I have a Docucolor 5252 with the creo spire rip and my rip's hard drive went bad and spent countless hours with tech but he could not get me back up. i have acquired and fiery xp6000 rip from a friend which had it running his docucolor 6060. thought it would of been a plug and play thing but doesn't work. when i tried connect i first got the blue error screen on windows about outdated bios but then is went away. but the rip does not see the hardware once i look in device manager seems like the four video cards are not being recognized? I hope i did not confuse any one in my problem? any advice on how to marry this rip to my docucolor 5252. I've been out of commission for weeks now and need help.
I have a Docucolor 5252 with the creo spire rip and my rip's hard drive went bad and spent countless hours with tech but he could not get me back up. i have acquired and fiery xp6000 rip from a friend which had it running his docucolor 6060. thought it would of been a plug and play thing but doesn't work. when i tried connect i first got the blue error screen on windows about outdated bios but then is went away. but the rip does not see the hardware once i look in device manager seems like the four video cards are not being recognized? I hope i did not confuse any one in my problem? any advice on how to marry this rip to my docucolor 5252. I've been out of commission for weeks now and need help.
↧