I have aquired alot cyan and yellow toner for xerox dc250 etc. they will sell in packs of two, cash on collection please, 90 for a set of two
↧
xerox dc250 toner
↧
Samsung 4521f
Hello all, I have Samsung 4521f I change toner and I print 20 page one moment print and copy more fade and visible behind any ide??
↧
↧
Printer Prints Lines
I have a photocopier Model C 253. My problem is that the printed page has stright line all over the page, with equal gap between each line of 4 mm. I changed the transfer, calibrated the NVRAM, I made gradation calibration of the machine and nothing helpd, the problem remined the same.
I attached an example of a printed page.
Thank you,
Avner.
I attached an example of a printed page.
Thank you,
Avner.
↧
MP 4000 gray background---
All of us are accustomed to the MP4000/5000 buildup on the developer cylinder by now and the adjustments in the Tech bulletins to minimize fogging/gray background. But this time I have an issue that's a bit different...............
Customer had perfect clean copies with nice bold blacks and according to them,in an instant they had dark gray background. You can see the image being copied ok thru the background. It's like it went from normal toner concentration to overtoned but again----in the blink of an eye. PCU drum is very new and developer was changed maybe 17K ago when the PM160 kit was installed. Back of PCU and developer are clean - and interior of machine and contacts are clean also. Made some skyshots after installing an empty toner to try and tone it down and got an SC350 code. Drum main charge looks clean.
My next step will be to replace and initialize the ID sensor and maybe replace the xfer belt assy. Also thinking about purchasing and installing one of those ground straps NA Trading offers.....Any thoughts/advice appreciated.
Customer had perfect clean copies with nice bold blacks and according to them,in an instant they had dark gray background. You can see the image being copied ok thru the background. It's like it went from normal toner concentration to overtoned but again----in the blink of an eye. PCU drum is very new and developer was changed maybe 17K ago when the PM160 kit was installed. Back of PCU and developer are clean - and interior of machine and contacts are clean also. Made some skyshots after installing an empty toner to try and tone it down and got an SC350 code. Drum main charge looks clean.
My next step will be to replace and initialize the ID sensor and maybe replace the xfer belt assy. Also thinking about purchasing and installing one of those ground straps NA Trading offers.....Any thoughts/advice appreciated.
↧
Scan to folder canon 3235
Scan to folder IR 3235
Does any body know how to configure scan to folder in a mac computer ?
Does any body know how to configure scan to folder in a mac computer ?
↧
↧
Canon ir-advc9280 pro
Hi to all,
im working on pro series 9280 the machine was working very good but the yellow drum looks bad the blade not cleaning it ,so i had an old drum assembly with the primary roller i removed the parts and installed it to the one it workin in after i finished i turend the machine on and fastly error code e0025-0110 display ,then i turend all the parts back (drum and the primary) thought the code occur when i exhanged ,and then i turend it on again the error occur also,i got lost cos on the service manual said theres somthing on the hooper or patch sensor want to clean ,but i didnt work at all at the hooper side!!
what i also noticed that when i turend the machine on all the toner bottles door are opened .
not only that the error changed also from e0025-0110 to 0210. Also the machine from time to time gove e197-2000.
please help thanks.
im working on pro series 9280 the machine was working very good but the yellow drum looks bad the blade not cleaning it ,so i had an old drum assembly with the primary roller i removed the parts and installed it to the one it workin in after i finished i turend the machine on and fastly error code e0025-0110 display ,then i turend all the parts back (drum and the primary) thought the code occur when i exhanged ,and then i turend it on again the error occur also,i got lost cos on the service manual said theres somthing on the hooper or patch sensor want to clean ,but i didnt work at all at the hooper side!!
what i also noticed that when i turend the machine on all the toner bottles door are opened .
not only that the error changed also from e0025-0110 to 0210. Also the machine from time to time gove e197-2000.
please help thanks.
↧
Oce Pagestream 744 Twins config
Hi,
trying to Setup a twin System but need help.
synchron mark is printed on RF1 close to perfuration and banner sensor on RF2 don't read.
Some ideas?
trying to Setup a twin System but need help.
synchron mark is printed on RF1 close to perfuration and banner sensor on RF2 don't read.
Some ideas?
↧
Error #002-000 for Samsung 6545
I just got this issue this morning error#002-000, I looked up in Service manual all over but nothing help with this issue.
I checked with Drum unit and fuser unit it look normal, please help me. Thanks
I checked with Drum unit and fuser unit it look normal, please help me. Thanks
↧
Broken gear of the drum magenta on iRADVC 7260.
Here I am again ! ! !
And I have a mystery to solve worthy of Sherlock Holmes ...
I have a iRADVC 7260 that after (about) 30.000 prints, it breaks the gear of the drum Magenta....
And only of the drum magenta ! ! !
Some know the solution at this problem ? ? ? :confused: :confused: :confused: :confused: :confused: :confused:
Thank you !
And I have a mystery to solve worthy of Sherlock Holmes ...
I have a iRADVC 7260 that after (about) 30.000 prints, it breaks the gear of the drum Magenta....
And only of the drum magenta ! ! !
Some know the solution at this problem ? ? ? :confused: :confused: :confused: :confused: :confused: :confused:
Thank you !
↧
↧
server 2012
Hi all
have a customer who has upgraded his server to 2012, he is looking at setting up SMB 3 scan to folder, been told by manufacturer it cant be done. ?? true or false
Regards
George
have a customer who has upgraded his server to 2012, he is looking at setting up SMB 3 scan to folder, been told by manufacturer it cant be done. ?? true or false
Regards
George
↧
MPC3300 Lower Thermistor Sub Connector
Does anyone have a Part Number for a replacement connector. I had this apparently connected to the thermistor and tossed it. : (...I have looked in the parts book diagrams which really suck and cant see anything. I was thinking an older machine that may have the same connector. Its like a double sided connector that the lower thermistor and the thermistor wiring plugs in to. I rebuilt this fuser and was pulled on and off of it so many times I just lost track of it . I tried to upload a picture ill have to try later a different computer this lap top sucks.
↧
Ricoh 6054 or 6002? - your opinion
Hi. I'm looking for some thoughts & opinions based on experience.
Our small office is about to renew a 4 year contract with Ricoh for a copier/printer/scanner/fax & I would like to become more knowledgeable about our options & the opinions/thoughts of those more savvy about these machines.
We are a small (5 people) law firm, busy, 9k-12k images (fax, copy, or print) per month - the photocopier (currently a Ricoh Aficio MP 6001) is the technological heart of the office.
We are very happy with our Ricoh serviceman & the service side of things (i.e. we would like to stay with him).
We need reliability & quick "fix it" time. Monthly amount paid is important, too, but less so than the reliability & quick repair.
Currently Ricoh sales is proposing an MP6054SP to us. Our service man (we have a more regular working relationship with him than the salesman....) prefers the 6002.
What are other people's thoughts/opinions & experiences with comparing & contrasting the MP6054 vs. the Aficio MP6002? Any suggestions.
Much obliged. Thank you.
Our small office is about to renew a 4 year contract with Ricoh for a copier/printer/scanner/fax & I would like to become more knowledgeable about our options & the opinions/thoughts of those more savvy about these machines.
We are a small (5 people) law firm, busy, 9k-12k images (fax, copy, or print) per month - the photocopier (currently a Ricoh Aficio MP 6001) is the technological heart of the office.
We are very happy with our Ricoh serviceman & the service side of things (i.e. we would like to stay with him).
We need reliability & quick "fix it" time. Monthly amount paid is important, too, but less so than the reliability & quick repair.
Currently Ricoh sales is proposing an MP6054SP to us. Our service man (we have a more regular working relationship with him than the salesman....) prefers the 6002.
What are other people's thoughts/opinions & experiences with comparing & contrasting the MP6054 vs. the Aficio MP6002? Any suggestions.
Much obliged. Thank you.
↧
Riso RN2000 T01-520
Hi all,
does anyone have any experience on the old riso rn2000 machines, as I have a problem with one where the drum is locked inside machine. It started when it was about to run. Heard a few loud spring ping sounds and an error code is displayed t01-520. Im thinking its something to do with the transfer roller underneath. And the drum is stuck.
Any suggestions?
does anyone have any experience on the old riso rn2000 machines, as I have a problem with one where the drum is locked inside machine. It started when it was about to run. Heard a few loud spring ping sounds and an error code is displayed t01-520. Im thinking its something to do with the transfer roller underneath. And the drum is stuck.
Any suggestions?
↧
↧
Com Color 7050 issues
Hi everyone,
Iv got a com color 750 with a few problems relating to the multifunctional finisher.
First I'm getting a lot of X17-3140/1 errors, to which I have fitted a modded plate and removed static brush. Also changing sensors in de-curler unit. Still no joy though.
Second is a issue with the booklet/staple unit section, where it asks to re-insert the unit even though it is already in.
And finally an issue with A4 booklets, where the middle page only is offset. Again I have referred to the bulletins. Even tried putting copper tape in staple tray section as advised by Riso.
Any suggestions would be appreciated.
Iv got a com color 750 with a few problems relating to the multifunctional finisher.
First I'm getting a lot of X17-3140/1 errors, to which I have fitted a modded plate and removed static brush. Also changing sensors in de-curler unit. Still no joy though.
Second is a issue with the booklet/staple unit section, where it asks to re-insert the unit even though it is already in.
And finally an issue with A4 booklets, where the middle page only is offset. Again I have referred to the bulletins. Even tried putting copper tape in staple tray section as advised by Riso.
Any suggestions would be appreciated.
↧
panasonic workio dp 8016 load paper
hi guys
i have got my Panasonic machine which is asking to load paper and its not processing, i have tried to change the paper lift motor and the sensor but nothing has changed,now i need to know how to clear this,does anyone know about this problem,please help i am stranded.
i have got my Panasonic machine which is asking to load paper and its not processing, i have tried to change the paper lift motor and the sensor but nothing has changed,now i need to know how to clear this,does anyone know about this problem,please help i am stranded.
↧
Estudio 2330c Toner density
Toshiba 2330c had a CE 20 code. After replacing transfer belt unit from another machine, the code went away. We now get what appears to be a toner density patches on every print. Any idea what would cause this?
Thanx in advance guys and gals, you all usually come through for me.
Thanx in advance guys and gals, you all usually come through for me.
↧
Card Reader installation ?
Anyone installed card readers on 364/654/5111 etc? Have to install several later this week...not looking forward to it. Have AMX2's for the units that don't come with it standard. Realize that is simple Product Key entry. The readers are from Sharp supported ACDI. Account did not want to purchase PaperCut with them...so they are simply used as access. Biggest question would be how does this work with credentialing and/or LDAP on server. Their IT should be able to work through this ? Easy/ Hard ?
Thanks in advance for any insights to this project.
Thanks in advance for any insights to this project.
↧
↧
Miscellaneous black streaks MFC 9330CDW
Hi all,
I'm new here so some help and advice please
i have a MFC 9330CDW and the prints are coming out with black streaks, sometimes you can't read it at all faded print. but not always!! sometimes the printer is working fine but then sometimes the problems begins. i tried inserted a new black toner works fine at the beginning and then the problem with the streaks and faded print. try contacting brother support with no actual result. try switching the black and cyan works for a few prints only fine. at last i changed the main pcb and high voltage pcb but no.... after a few prints you see streaks and faded print outs again
can anyone tell whats wrong with the printer?????
I'm new here so some help and advice please
i have a MFC 9330CDW and the prints are coming out with black streaks, sometimes you can't read it at all faded print. but not always!! sometimes the printer is working fine but then sometimes the problems begins. i tried inserted a new black toner works fine at the beginning and then the problem with the streaks and faded print. try contacting brother support with no actual result. try switching the black and cyan works for a few prints only fine. at last i changed the main pcb and high voltage pcb but no.... after a few prints you see streaks and faded print outs again
can anyone tell whats wrong with the printer?????
↧
Konica Minolta 7228 duplex lead edge trailo edge
I am not familiar with this model. When I duplex portrait on 8.5 x 11 the copy comes out lead edge trail edge. I am trying to produce an exact copy bot the second side is reversed. Any recommendation ?Thanks Ray
↧
Greeting
Hello Everyone
I'm Bob and I'm an IT Tech for a Laboratory in E. Brunswick NJ.
I have been in IT for about 8 years.
I'm Bob and I'm an IT Tech for a Laboratory in E. Brunswick NJ.
I have been in IT for about 8 years.
↧