Part # for Updated Toshiba 756 Drum Separation Fingers
Does anyone have part numbers for the newer (Serial # CKGC12781 & above) Drum Separation Claws that fit the E Studio 756 series copiers? Thanks for any help. Jerry
View ArticleError Code WC 4150 - Toner Seal Not Removed
After several copies this 4150 gets an error message that the toner seal is not removed..tried a different toner and drum from a working copier and still get the message. Noticed that toner waste bin...
View ArticleE7-14 error
This error E7-14 has come up twice on a brand new mx-5141. The first time was the day of the installation at the the customer site. Clearing the code by cycling power it did not return that day. Now,...
View Articlekonica 7222 f-23-1 error code
hi i have a konica 7222 with a 23-1 error code. i thought 23 code was toner motor and since i had one with me i cahanged it. still f23-1 code. i was able to get on internet at customers and found...
View ArticleRicoh Aficio 2035
What would cause paper being fed L.E.F. to bend the lead edge corner down? I know that it was sticking on the heat roller, and decided it was best to replace both rollers. However, after replacing...
View ArticleCanon ir5570 dark copy only copying Ok when printing
Please help. When I copy from glass or feeder, dark copy. When Copying say printing the logs ok. Dark copy does have print.
View Articlesite cetificates for scan to e-mail
I was hoping to be able to get a customer to be able to scan to G-mail. After trying all the tricks I called up Tech Support. They informed me that we will not be able to set up SSL for G-mail, Yahoo,...
View ArticleDrum reset
I was wondering if someone would kindly share the drum counter reset procedure for the IR3320i ??
View ArticleDo not pm me for a manual!
I do not respond to messages asking for service or parts manuals. I do swap if I need one in return or request one in the correct forum. thank you aka GRUMPY BASTARD
View ArticleClik here to view.
Mp c300 adf part question
Hi, All. I am confused. (what else is new). This page is from the C300 PC, ADF section. I just need the part # for the little rubber pad on the holder. Also, why are there different part numbers for...
View ArticleCQ panasonic DP 4530 Image shifts intermitently(lead to trail) .2-1 inch
I have a subcontractor that is having a problem with image shifting . Here are the syptoms.Shifts on all trays ,on the glass,document feeder and print mode. it definetly is a processor problem. opened...
View ArticleError Code Canon IRC 1021i error code E000744
Hello. I am getting error code E000744 on my Canon Image Runner Color 1021i. I was trying to clear previous configurations of the machine in the Service Menu -> COPIER->FUNCTION->CLEAR, and in...
View ArticleTech needed in Montrreal for KM C5500
I'm looking for a tech to do regular maintenance on our KM C5500. We also have a KM361 b/w machine but no real issues with this machine yet. Contact George at 514-878-8273
View ArticleClik here to view.
OUYA Founding Team Member And VP Of Product Development Departs
One of OUYA’s founding members, Muffi Ghadiali, has left the company, TechCrunch has learned. Ghadiali was instrumental in helping launch the OUYA on Kickstarter and to the consumer market, and has...
View ArticleFor Sale Fax option type 3350/3351 d361/d510
I have a used fax option kit for a Ricoh, Lanier, or Savin MFP. This has been tested and will ship with the installation instructions, hardware, and fax button for the control panel. This fax option...
View ArticleCanon Imagepress C1 - Pressure pad ass"y FM3-1217-000
Hello guys, How I Change pressure pad ass'y FM3-1217-000? The machine is Canon Imagepress C1Thank´s!!!
View ArticleCQ HP CM2320 Crumpling prints
Just replaced the fuser in a CM2320 to get rid of ghosting. When I first installed the fuser and booted up the printer, it printed fine, but made a horrible grinding noise. I backed out the two fuser...
View ArticleClik here to view.
irc 4080 question
So this is another irc4080 that I just purchased for resale and there is a little problem, this screen shot seen here will not update, everr. And this is what it looks like around the back. The scuzzy...
View Articlemx-sharp-5141n dp jamming frequently with code E7-14 error
I have updated firmware and reset the code on several trips E7-14 on a brand new install. customer runs allot of scans. Any one else having jamming issues with or without the code. I want to stress all...
View Articlemx-pex2 (fiery fried... doesn't boot....want to disable fiery)
hi y'all... I am working on a sharp mx7000... it has a mx-pex2 fiery installed... the fiery will not power up... the customer got the machine as a gift and really doesn't care if the fiery works......
View Article